New CRAFTSMAN V20 RP Brushless Hand Planer Drops (And It's Got Some Serious Upgrades)

Hand planers have been around since your grandpa was framing houses in the '70s. They haven't changed much. You grab one, you shave wood, you move on with your life. But occasionally, a tool comes along that makes you rethink what you thought you knew. The new CRAFTSMAN CMCW350B V20 RP Brushless Hand Planer isn't reinventing the wheel here; it's just making that wheel spin a whole lot faster and smoother than before.

If you've been running corded planers or dealing with older cordless models that quit on you halfway through a door trim, this one's worth a look. CRAFTSMAN went back to the drawing board on their V20 line and came out swinging with a brushless motor that delivers. We're talking 15,000 RPM and 30,000 cuts per minute. That's not just marketing speak, that's the kind of speed that turns a tedious planing job into something you can knock out before lunch.

Here's the thing about brushless motors: they're not new, but they're finally at a point where they make a real difference in cordless tools. The CMCW350B uses one to stretch your battery life further than the old, brushed models ever could. You're getting more runtime per charge and more consistent power throughout that runtime. No more watching your planer slow down as the battery drains. It keeps cutting at the same pace from the first pass to the last.

CRAFTSMAN says you can get up to 24 passes on pine wood with a single charge using their 4Ah battery. That's based on one-meter lengths at 1mm depth and 50mm width, so your mileage may vary depending on what you're planing and how hard you're leaning into it. But 24 passes are enough to handle most trim work, door fitting, or small furniture projects without requiring a battery swap. And if you've already got V20 batteries lying around from other CRAFTSMAN tools, you're already set.

The depth adjustment maxes out at 5/64 inch per pass, giving you flexibility whether you're taking light shavings off a stubborn door or hogging material from rough lumber. It's not going to replace a thickness planer for heavy stock removal, but for on-site work or final fitting, it's got the range you need.

One of the underrated features here is the dust port. CRAFTSMAN went with a larger diameter opening, and it makes a difference. Planers throw chips everywhere; that's just physics. But a larger port means more of those chips are routed away from your work surface rather than piling up in front of the blade. You get better visibility of your cut line, and you're not constantly stopping to brush debris away.

If you hook it up to a shop vac, you can keep things even cleaner. But even running it solo, the chip ejection is noticeably better than older models. It's one of those small touches that doesn't sound like much until you're three doors into a remodel and you're not covered in wood shavings.

The jump from brushed to brushless isn't just about runtime. Brushless motors run cooler, they're more efficient, and they don't have carbon brushes that wear out and need replacing. That means less maintenance and a longer overall tool lifespan. For pros who beat on their tools daily, that's money saved over time. For homeowners who want a planer that'll still work five years from now when they need it, same deal.

The CMCW350B also keeps power delivery smooth. Traditional brushed motors can bog down under load, especially as the battery drops. Brushless motors adjust on the fly to maintain consistent cutting speeds. So, whether you're planing soft pine or harder oak, you're getting the same aggressive material removal without the tool fighting you.

This isn't a weekend warrior tool pretending to be professional-grade. It's built for contractors, carpenters, and serious DIYers who need a planer that shows up ready to work. The 15,000 RPM motor doesn't mess around, and the 30,000 cuts per minute means you're getting a finish that's smooth enough to reduce your sanding time. That's the real win here: less time fixing rough cuts and more time moving on to the next task.

And since it's part of the V20 platform, you're not locked into buying a new battery ecosystem. If you're already running CRAFTSMAN V20 tools, this planer slots right into your setup. Grab it as a bare tool and keep using the batteries you've got. Simple.

Looking to round out your toolkit? We've got the gear you need to get the job done right:

Whether you're building out a full workshop or just replacing a worn-out tool, AcmeTools.com has you covered with fast shipping and real support when you need it.

The CRAFTSMAN CMCW350B V20 RP Brushless Hand Planer is one of those tools that does exactly what it's supposed to do, no gimmicks, no BS. It's faster than the old models, runs longer on a charge, and keeps your work surface cleaner while you're cutting. If you're still dragging a cord around or dealing with a planer that can't keep up, this one's worth the upgrade.

Head over to AcmeTools.com and grab one before your next project. Your doors, trim, and lumber will thank you.