All control elements are located directly on the guide handle - The operator has complete control of the machine at all times from his operating position and does not have to move around the machine. This means more safety and comfort
Engine speed adjustment for engines with three positions (Off, Idle, Full Throttle) directly on the guide handle - To start and stop the machine, the operator does not need to leave his position - he has all control elements directly within access. The gas lever is also fixed at three positions, which makes operation very easy and does not require any special experiential knowledge
Good visibility on fill levels - The hydraulic oil level can be easily read at any time through an inspection window. Refilling is possible without dismounting the steel frame. The water tank level is visible at any time from outside through the slightly transparent tank material
Ergonomic handle and travel lever with recessed handles - The ergonomic design of the travel lever and guide handle makes guiding the machine convenient
Two vibration stages for various subbases - To achieve optimal compaction performance on asphalt as well as on soil, the vibration is selectable in two stages: high frequency for soil compaction and low frequency for asphalt compaction. The different vibration stages are reached by changing the exciter speed
Long guide handle makes steering and turning easier - The length of the guide handle was chosen to provide optimum leverage. This makes turning and maneuvering particularly easy
Vibration-damped guide handle with the lowest HAV on the market (< 2.5 m/s²) - Thanks to the HAV values below the triggering value of 2.5 m/s², the documentation requirement is eliminated for the contractor. The low HAV values and the ergonomic design of the control elements make working convenient and comfortable for the operator
Easily accessible, sturdy hydraulics - The hydraulics are particularly sturdy. Due to the clearly arranged layout of the cables and the open machine design, it can be cleaned well
Protective hood foldable tool-free - The hood, made of heavy-duty plastic, can be folded up tool-free and offers generous access to all maintenance points. This saves time on maintenance
Large curb clearance with only a small lateral overhang, and the machine tapering upward - The slight lateral overhang (30 mm each side) makes it possible to work very close along walls. The tapering gives the upper mass sufficient distance from the wall, preventing damage
Buy now, pay over time
Example payments based on a 
Wacker Neuson
