SNOWSPORT Plows need to be attached to a front or rear mount that is designed for your make, model, and year of vehicle and compatible with the SNOWSPORT Plow purchased. These mounts are SOLD SEPARATELY. Front or rear mounts require 8 to 16 inches of clearance from under receiver to level grade when installed. Vehicles with suspension modifications (oversized tires, lift kits, etc.) may cause SNOWSPORT Utility Plows to fit and operate incorrectly. 2 Inch receiver required to plow, SOLD SEPARATELY.
Note: Front or rear mounts require 8 to 16 In. of clearance from under receiver to level grade when installed. Vehicles with suspension modifications (oversized tires, lift kits, etc.) may cause SNOWSPORT® Utility Plows to fit and operate incorrectly
Box Ends: Maintain snow in front of the blade and prevent from spilling out sides
No Wiring or Extra Lights: Low-profile plow doesn't block original equipment manufacturer headlights in plow or transport position, not necessary to remove snowplow when driving
Corrosion Resistant, Aluminum Blade: Robust, anodized aluminum blade is vehicle friendly and stacks snow taller than vehicle's hood. Blades available 18 In. high and in both 84 and 96 In. lengths
Three-Point Angling Interceptor: Easily change blade position to the right, left or center
Easy on and off: Secures with a single pin, zero tools required. Conveniently interchanges from one truck to another when outfitted with 2 In. receiver. No electrical and hydraulic parts to maintain or breakdown
Heavy Duty Push Frame: Enables blade to slide up and down following the terrain. Quick pins lock blade in the transport or plow position
2 Comments