576423: Mortise width adjustment with the turn of a dial allows for easier alignment when joining panels. Patented routing principle - The spiral cutter rotates and oscillates to create perfect mortises. Mortise Width Adjustment - Adjusting the width of the mortise allows for easier alignment when joining panels. Positioning - With an adjustable fence angle, retractable stop flaps, adjustable cutter height with step gauge, and precise mortise depth stop, the DOMINO joiner enables precise mortise placement and spacing. Pivoting fence - Pivoting Fence allows you to create angled mortises from 0-90 Deg with positive stops at 22.5 deg, 45 deg, 67.5 deg. Depth Control - Quick, precise adjustment for five different mortising depths, relative to the size of the tenon required for the application. Stepped Height Stop - 7 different step positions for different material thicknesses for fast and easy fence height adjustment. Dust extraction - Your mortises are clean and ready for glue when the DOMINO is used in combination with a dust extractor. Proper dust extraction greatly extends cutter life. Carbide Tip Spiral Bit - Durable, long-lasting bit withstands 5,000-14,000 joints depending on material. Rapid Bit Change - Means you can change a bit in under 30 seconds to match desired tenon size.
576794: All DOMINO dowels quickly at hand due to tidy storage in the Systainer. Get started immediately, as the required routers are included in the set. The cross cut of a DOMINO dowel corresponds to that of three round dowels of the same drill diameter, meaning that it is extremely steady in comparison. The laterally projecting guide ribs centre the dowel in the middle of the DOMINO milling groove and thus ensure perfect alignment of workpieces. Specially formed glue pockets and longitudinal grooves distribute the glue evenly, for optimal joining. Excessive glue can escape through the lateral longitudinal grooves. 100% rotation-proof right from the first DOMINO. Quick finding of the right dowel through imprinted size specifications. All DOMINO dowels quickly at hand and cleanly packed in the Systainer³. Not flat. Not round. DOMINO - DOMINOs combine all the advantages of round and flat dowels. Thanks to their unique shape, they are extremely stable and secured against rotation right from the first dowel. For inside and out - DOMINOs are available in two materials: Beech for interior applications and weatherproof, insect- and mould-resistant sipo DOMINOs for outdoor applications. 100% rotation-proof - Right from ,the first DOMINO the joints are completely secured against rotation - without aligning the workpieces. Overview of dowel sizes - The right dowel for every application: With different sizes from 4 x 20 mm up to 14 x 140 mm and individually adjustable rods. The right dowel for every DOMINO machine - With the DOMINO DF 500 joining machine, you use dowels from 4 x 20 mm to 10 x 50 mm in size. For the DOMINO XL DF 700, you can use dowels from 8 x 40 mm up to 14 x 140 mm in size and the corner and flat connectors. Maximum stability - The special shape of the DOMINO in combination with expanding glue pockets and lateral longitudinal grooves gives the dowels a secure grip. A perfect fit - The DOMINO DF 500 jointers precisely adjust the holes to the respective dowels. The special grooving geometry of the dowels enables accuracy and a perfect fit. Environmentally friendly - All DOMINOs originate from sustainable forest management. The beech dowels are certified by the Pan European Forest Council (PEFC). Now extremely flexible, too - The new DOMINO corner and flat connectors: Connect even quicker and release it again as necessary.
576423: Includes: DOMINO DF 500 7/32 In. (5 mm) Cutter, Support Bracket, Trim Stop, Cross Stop, Open Ended Spanner, WAF 8, Plug It-Power Cable (4 m), Systainer SYS3 M 187
576794: Includes: DOMINO Tenon Assortment 4 x 20 mm (450 Pieces), 5 x 30 mm (225 Pieces), 6 x 40 mm (150 Pieces), 8 x 40 mm (100 Pieces), 8 x 50 mm (75 Pieces), 10 x 50 mm (60 Pieces), DOMINO Router for Sizes 4, 5, 6, 8 and 10, Systainer SYS3 M 187
576423: Mitre Routing: 0 - 90 deg, Routing Height Adjustment: 1/8 In. (5 mm) - 1-3/16 In. (30 mm), DOMINO Slot Cutter Diameter: 3/16 In. (4 mm)/1/8 In. (5 mm)/1/4 In. (6 mm)/5/16 In. (8 mm)/3/8 In. (10 mm)
Buy now, pay over time
Example payments based on a 
Festool
