Engine Rehlko (Kohler)
Hose replacement made easy - the goose neck can easily be removed to simplify adding long lengths of hose to the reel
Full flow stress free swivel design - the full flow swivel combines the highest grade seal design and materials with bearing areas to insure maximum service life
Quality finish and corrosion resistant - individually powder coated components offer the maximum protection from premature corrosion
Easy to add tension - the T-handle tensioning device allows proper tension to be applied to the spool to eliminate the free spooling of the reel
Air/Oil Separator: Air and oil separation is achieved through a centrifugal compressor oil separator with a spin-on type filter element for easy maintenance. Separators are ASME/CRN-approved versions and are stamped accordingly. The separator is equipped with a sealed high-pressure safety relief valve, sonic nozzle, automatic blow-down valve, and pressure regulator. Easy to service in less than one hour, no special tools required, and up to 1,500 hours or 2 years compressor service interval
Cooling System: The cooling system consists of an integrated side-by-side aluminum oil cooler with an axial fan to ensure optimum cooling. A guard for operator safety protects the fan and has an access port on both sides of the fan box for easy cleaning. The cooling system is suitably designed for continuous operation in ambient conditions up to 122 Deg F, with the canopy closed
Compressor Regulating System: Consists of an air receiver/oil separator, a compressor element, a blowdown valve, and a pressure safety valve. Economic power consumption is assured by the fully automatic 100% step-less speed regulator that adapts engine speed to air demand
Discharge Outlets: Compressed air is available from 2 x 3/4 In. outlet valves, with claw type (Chicago) coupling
Storage Compartment: The compressor has a built in open top toolbox compartment. Toolbox dimension is: 34 Ft. Length x 7.4 In. Width x 11 In. Height