• Home
  • MAKITA-194368-5

Mouse over above image to zoom.

SP6000K 55In Guide Rail

194368-5

Rating:
MAKITA-194368-5 is rated 3.5 out of 5 by 2.
  • y_2017, m_7, d_19, h_14
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_10001_10751_3074457345616849072, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_acmetools
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getAggregateRating, 13ms
  • REVIEWS, PRODUCT
 Arriving Soon!

Warehouse acquiring product. Usually ships in 7-10 business days.

Low Price Guarantee
Low Price Guarantee Close  
Price Guarantee:
At Acme Tools we pride ourselves on offering you the best selection of tools, equipment and supplies in the industry at guaranteed low prices. From time to time we are not always able to see what the competition is doing. Our product is priced as low as possible. However, our prices won't be beat. If you see the exact item currently advertised for less (including the competitor's shipping and handling charges, taxes or any other hidden charges) we will match that price. We reserve the right to verify current and net prices in these situations. See terms and conditions below. In the event of finding a lower price, use our Contact Us form and include the following information in the Comments Section for verification: Your order number, date of purchase, product number of item as well as the competitor's website and price. We will review the information, issue credit (if applicable), and get back to you within two business days.

Terms and Conditions:
  • The seller must be an authorized retail dealer.
  • Product must be in stock and an identical item.
  • This policy does not apply to auction sites, closeouts, clearance sales, misprints, giveaways, special promotions or discount offers and may not be used in conjunction with any other Acme Tools offers or coupons.
  • This policy is only valid within 30 days after your purchase date.
  • Your refund will be issued in the same form as your original payment.
List: $127.80
Was: $79.99
Now: $74 .99

SP6000K 55In Guide Rail

Qty,

SP6000K 55In Guide Rail

Aluminum guide rail 55 In. The 118 In. guide rail system interacts with the saw base to provide smooth, perfect, dead-on straight or bevel cutting.

Features
  • 55 In. guide rail for Makita SP6000K
  • Aluminum rail
  • Smooth rubber inserts for smooth operation
  • Fits other guide rail saws in the market
Specifications
Customer Reviews
Rated 4 out of 5 by from Good Tracks I have both the 118 and 55 tracks. Both were used with the Makita track saw to cut up 20 sheets of 1/2 inch BC underlayment prior to installing flooring. There were a lot of obstacles to cut around in the kitchen, island, cabinets, and so forth. The cuts were nice and straight. Being able to lay the track on the plywood at my marks and cut was a big time saver. I didn't have an issue with tracks sliding. I would vacuum off dust from the foam on the back side of the tracks every so often and this kept them in place really well.
Date published: 2017-04-30
Rated 3 out of 5 by from Straight track but use clamps. Two of these tracks came in a kit with the Makita track saw. The cut quality of the saw is fantastic and I have no complaints with it, however, the track is not quite as good as the saw that rides on it. The track works well enough and is very straight, however, the anti-slip feature did not work as advertised on either of the two tracks that I have. If I don't use the track clamps that came with my kit, the track will move slightly in the middle of the cut, which I found out the hard way. Knowing that in advance, you can pretty much always clamp the track down and be fine but needing space for the clamps under the track does make it harder to break down sheet goods on the ground, which was the main reason I bought it. Instead of using the saw on the ground with a piece of foam under the plywood like I planned, I simply bring the whole operation onto a couple of saw horses, use the track clamps to keep everything in place, and I'm fine. I absolutely love the Makita track saw but I plan to see if my saw will run on the Festool track system. If so, I may upgrade my tracks since I've had a chance to speak with a few guys that have the Festool track saw and all of them have told me that track slippage is not an issue for them.
Date published: 2017-03-06
  • y_2017, m_7, d_19, h_14
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_10001_10751_3074457345616849072, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_acmetools
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getReviews, 0ms
  • REVIEWS, PRODUCT