• Home
  • LEECRAFT-DW-2

Mouse over above image to zoom.

Zero Clearance Table Saw Insert - DW744

DW-2

Rating:
LEECRAFT-DW-2 is rated 5.0 out of 5 by 1.
  • y_2017, m_6, d_25, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_10001_10751_3074457345617165420, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_acmetools
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getAggregateRating, 59ms
  • REVIEWS, PRODUCT
 Arriving Soon!

Warehouse acquiring product. Usually ships in 7-10 business days.

Low Price Guarantee
Low Price Guarantee Close  
Price Guarantee:
At Acme Tools we pride ourselves on offering you the best selection of tools, equipment and supplies in the industry at guaranteed low prices. From time to time we are not always able to see what the competition is doing. Our product is priced as low as possible. However, our prices won't be beat. If you see the exact item currently advertised for less (including the competitor's shipping and handling charges, taxes or any other hidden charges) we will match that price. We reserve the right to verify current and net prices in these situations. See terms and conditions below. In the event of finding a lower price, use our Contact Us form and include the following information in the Comments Section for verification: Your order number, date of purchase, product number of item as well as the competitor's website and price. We will review the information, issue credit (if applicable), and get back to you within two business days.

Terms and Conditions:
  • The seller must be an authorized retail dealer.
  • Product must be in stock and an identical item.
  • This policy does not apply to auction sites, closeouts, clearance sales, misprints, giveaways, special promotions or discount offers and may not be used in conjunction with any other Acme Tools offers or coupons.
  • This policy is only valid within 30 days after your purchase date.
  • Your refund will be issued in the same form as your original payment.
List: $28.00
Now: $23 .99

Zero Clearance Table Saw Insert - DW744

Qty,

Zero Clearance Table Saw Insert - DW744

Leecraft phenolic table saw inserts reduce splintering and chip-out on the bottom side of regular or dado table saw cuts. The opening in the insert is cut on the table saw to the exact width of the saw blade’s kerf. The matching kerf prevents thin slices of wood from jamming in between the blade and the throat plate during a cut. It also reduces the amount of tear-out that can happen with a standard insert.

Features
  • The zero clearance concept is simple: the blade cuts its own perfectly sized slot by being raised through a machinable blank insert
  • A pre-cut starter pocket makes cutting the clearance slot easy and a finger hole makes for simple removal and hanging
  • Measures 13-5/8-by- 3-3/4 In.
  • Instructions also included
  • Colors may vary
  • Made in USA
  • Most inserts are 1/2 In. thick, high-density phenolic laminate, with a bonded-melamine surface
  • They offer superior rigidity, flatness, durability, and low friction and should not be confused with inferior HD/PP inserts
  • They feature leveling screws, side and end adjustment screws for a vibration-free fit, rear safety pin for lift-out protection, and a pre-cut blade bottom pocket that provides clearance for fully retracted blades and bevel cuts
  • Table saw insert for DeWalt DW744, DW745 and DW746
  • Significantly reduces saw noise, dust, chip-out, and splintering
  • Constructed of high-density phenolic laminate with a bonded-melamine surface
  • User-friendly with leveling and lateral adjustment screws, rear anti-life pin, and precut blade bottom pocket
  • Use carbide-tipped blades only
Specifications
Customer Reviews
Rated 5 out of 5 by from Leecraft DW-2 for Dewalt DWE7491RS Purchased for use with my Dewalt DWE7491RS and Freud Next Gen Premier Fusion general purpose 40T blade. Insert fits and works well, as advertised*. *Insert's kerf/slot will need to be extended toward the back to allow for the factory riving knife to fit, with a condition. Manufacture's directions suggest not cutting this slot right through to the back, but rather leave a 'bridge' of insert material remaining. I have done as recommended however this is limiting the height the blade is able to be raised as the riving knife binds on this 'bridge' (see attached images). I completed this slot extension using my table saw, with the 'bridge' being present only on the bottom side of the insert. Different cutting techniques could result in different bridge sizes/shapes and therefore these results may vary. When the need arises for me to further increase blade height (and as I purchase several of these inserts), I may cut through the bridge and test its integrity. This would therefore mimic the factory insert's design with a through slot at the back. Colours will reportedly vary, with my three inserts arriving all different but all in the beige/gray family of colours -- no concerns in my mind. The insert's four levelling adjustment screws (same concept as factory insert), the single side-to-side adjustment screw and the single fore/aft adjustment screw function well, providing a snug insert fit. There is no locking feature on these inserts, similar to what is used by Dewalt on the factory insert. This does not pose any issues, nor have I seen any concerns noted online during my research into this product. A new and happy Acme Tools customer, with the Leecraft inserts arriving safe and sound in a very timely manner. Thanks Leecraft and Acme Tools for great quality products and service.
Date published: 2016-10-17
  • y_2017, m_6, d_25, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_10001_10751_3074457345617165420, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_acmetools
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getReviews, 0ms
  • REVIEWS, PRODUCT