Mouse over above image to zoom.

Carbide Flush Cutting Blade


DREMEL-MM485 is rated 1.3 out of 5 by 15.
  • y_2017, m_8, d_14, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_15
  • loc_en_US, sid_10001_10751_3074457345617263424, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_acmetools
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getAggregateRating, 26ms

Ships in 1 business day

Low Price Guarantee
Low Price Guarantee Close  
Price Guarantee:
At Acme Tools we pride ourselves on offering you the best selection of tools, equipment and supplies in the industry at guaranteed low prices. From time to time we are not always able to see what the competition is doing. Our product is priced as low as possible. However, our prices won't be beat. If you see the exact item currently advertised for less (including the competitor's shipping and handling charges, taxes or any other hidden charges) we will match that price. We reserve the right to verify current and net prices in these situations. See terms and conditions below. In the event of finding a lower price, use our Contact Us form and include the following information in the Comments Section for verification: Your order number, date of purchase, product number of item as well as the competitor's website and price. We will review the information, issue credit (if applicable), and get back to you within two business days.

Terms and Conditions:
  • The seller must be an authorized retail dealer.
  • Product must be in stock and an identical item.
  • This policy does not apply to auction sites, closeouts, clearance sales, misprints, giveaways, special promotions or discount offers and may not be used in conjunction with any other Acme Tools offers or coupons.
  • This policy is only valid within 30 days after your purchase date.
  • Your refund will be issued in the same form as your original payment.
List: $21.00
Now: $19 .99

Carbide Flush Cutting Blade


Carbide Flush Cutting Blade

The Dremel MM485 Carbide Flush Cutting Blade is the first oscillating cutting blade with high-performance carbide teeth. Now users can cut hardwoods, nails, screws, stainless steel bolts, galvanized pipe, plaster & lathe, cement board, fiber board, sheet metal, slate, ceramic wall tile and more! Its wide 1-1/4” blade speeds through long cuts and can make plunge cuts up to 1-11/16” deep. Universal Quick-Fit™ system allows this blade to fit nearly every oscillating tool on the market.

  • Carbide tooth blade material for high-performance hard material cutting applications
  • High performance flush cut blade—provides longest life and fastest cut of all Dremel flush cut blades
  • Universal Quick Fit™ System for fast accessory changes
  • Select Multi-Max accessories are evaluated by an independent, third-party laboratory to undergo tests of endurance and speed against the oscillating accessories offered by our competitors
  • See Multi-Max accessories go head-to-head against competitors at the Max Performance Tested website:
Customer Reviews
Rated 1 out of 5 by from Waste of money I bought this blade because it claims to cut ceramic tile. Well it doesn't! I'm extremely disappointed with this product and a few other of the Dremel cutting accessories. They do not last more than a few cuts and cost way too much money! Save your money!
Date published: 2016-08-25
Rated 1 out of 5 by from Not happy I tried to cut through a very small #10 bold but the blade went dull after one round of attempting to cut. Not only am I unhappy with the quality of the blade, I'm unhappy with the quality and power of my Dremel Multimax Cordless tool. The cordless version doesn't seem to the have the same power as the corded version.
Date published: 2016-01-08
Rated 1 out of 5 by from Not up to dremel standards - save you money I purchased this blade last week for a small home repair. After "attempting" to cut the head off a screw, the teeth on the blade were completely worn down. I should have read these reviews first. The blade lasted less than ten minutes.
Date published: 2015-10-13
Rated 2 out of 5 by from Did the (small) job, but This blade came in a kit I bought today. I just needed to cut the shaft of an M6 mounting bolt. It cut through this one small bolt, but the teeth were heavily worn afterward. I'm now weary of the other accessories' life spans. If this is the normal qlity of this carbide blade, I won't purchase another from this company.
Date published: 2015-08-16
Rated 4 out of 5 by from Despite the bad reviews, it worked for me. I bought this blade to cut through about 40 (1/2in) steel bolts in my back yard. Worked well for me.. took about 1 min per bolt.. but got the job done.
Date published: 2015-05-29
Rated 1 out of 5 by from Disappointing Bought it just last night, used it for less than 20 minutes and it was done. NOT normal quality for Dremel - I love just about everything else I own from them, but this was just bad.
Date published: 2015-03-15
Rated 2 out of 5 by from Works well for wood, drywall I love the versatility of the cutting tool, and it works especially well with Drywall and Wood. I went through two of these on a 1200sqft house remodel. which included replacing a bunch of drywall and a few walls. Unfortunately, the Carbide coating seemed to not work very long. After cutting into the wood for 10-20 mins, the bit looked about the same as a non-carbide bit and lasted about the same as well.
Date published: 2014-12-07
Rated 1 out of 5 by from Blade doesn't do the job!! Very disappointing! I hoped that the problem was fixed and the blades now worked. NOPE ... I need to trim a 2" strip off the top of the wall tile in an alcove in the guest bath to allow for the new countertop and backsplash to be installed on the new sink base. Two blades later, I have barely scratched the surface of the tile (approx. 4ft worth). I then bought the Dremel saw which works great, except I can't get in the corners. Heading back to the store ... maybe another manufacturer has something that will work. Not a happy camper~!~ waste of time and money!
Date published: 2014-11-09
  • y_2017, m_8, d_14, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_15
  • loc_en_US, sid_10001_10751_3074457345617263424, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_acmetools
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getReviews, 0ms