Acme Tools, Inc.

Contact Us

Name (required)

Email (required)

Notes


Steel Fiberglass Hammer in Framers Pouch

Why Use A Titanium Hammer

Hammers are one of the most important hand tools anyone can own. Most general contractors, handymen, and tradesmen have a preference as to the type of hammer they use when they are working on a project. We often choose different types of hammers based on whether we’re building, finishing, or demolishing. While you may already have a preferred hammer for different tasks, we would like to share with you the advantages of using a titanium hammer over steel.

4 Reasons Titanium Hammers Worth the Cost

  1. Titanium Hammers are Lighter and Easier to Use

A titanium hammer is much lighter than a steel hammer, so you can pound a nail in much faster since you are not swinging a very heavy hammer. You will make fewer swings with a titanium hammer because of the rate of energy transfer, so you will not get tired as quickly as you would if you were using a steel hammer. If you aren’t sure that you should believe us, do your own experiment, and let the results speak for themselves.

  1. Convenience

Titanium hammers have holding slits and claws just like steel hammers, so you will not need to give up those small conveniences if you decide to use a titanium hammer. Everyone knows the value of being able to recover crooked nails and drive them in as planned.

  1. Transfer Energy More Effectively

Above we talked about how you could swing a titanium hammer less often than a steel one and still get your work done faster. The reason for this is that you will be placing 97% of your hammer swing energy as you are pounding in a nail. When you use a steel hammer, only 70% of your swing energy is going into the nail.

  1. Handle Material Options

If you do make the switch to a titanium hammer, you will not need to worry about giving up your favorite hammer handle. Titanium hammers are available with three types of handles that include wood, fiberglass, and thermoplastic rubber. The rule of thumb for choosing the best handle for your titanium hammer is to go with what’s the most comfortable to you.

The Steel Hammer is Not Dead

Don’t worry, you won’t be laughed off the jobsite if you show up with a steel hammer. A lot of people still prefer steel over titanium for demolition simply because of the weight of the hammer. A steel hammer is roughly 45% heavier than a similar titanium hammer. Just remember, weight doesn’t always mean that you will have better results, even during the demolition process.

Reduce Musculoskeletal Disorders of the Hand and Arm

Work-related musculoskeletal disorders (WMSDs) are very common among tradesmen, general contractors, and other professionals who use hand tools. We can take a few precautions to reduce the likelihood that we will become affected by WMSDs. Switching to tools that transfer less vibration to the hand and skeletal system is one of the precautions we can take.

WMSDs that often Affect Tradesmen

Carpal Tunnel Syndrome

Many contractors and tradesmen think that carpal tunnel syndrome is only something that only happens to people who routinely work with computers. While it is true that people who type a lot are prone to carpal tunnel, they aren’t the only ones at risk. Carpal tunnel may also be caused by bending at the wrist or holding tools tightly, resulting in a burning and tingling in the hands.

Raynaud’s Syndrome or White Finger Disease

Many contractors are at risk for this syndrome/disease because it is generally caused by vibration. The vibration from power tools, hammers, chisels, and other tools can cause it.

Tendonitis

Overuse of the tendons causing pain, stiffness, and swelling is called tendonitis. Swinging a hammer incorrectly or using hand tools or power tools at odd angles can cause tendonitis.

Tips For Buying A Hammer

We’re including information about preventing WMSDs because it can affect the hammer you choose to use. Everything about the hammer from the weight to the handle material and the ergonomic qualities of the hammer as a whole have a big impact on how well the hammer works for you.

  • The hammer should not exceed 2.2 pounds.
  • A wood or fiberglass hammer handle can reduces vibration transfer to the hand.
  • Titanium hammer heads transfer 30% less vibration to the hand than steel.
  • Titanium hammer heads reduce recoil shock vibration to the hand which will help save your elbow from tendonitis and other injuries.

Get a Grip!

Seriously, find a hammer with the ideal grip size for your hand. Every person’s hand is made differently, so you probably won’t use an identical hammer to the one every other contractor out there uses. Otherwise why even worry with titanium vs. steel or wood handle vs. metal? The grip size needs to fit your individual needs and feel comfortable in your hand.

Take a Break!

We aren’t saying that you should take a break after every board, but periodically give your muscles and tendons time to relax a bit. A lot of hammer users don’t use the power-grip that’s required to properly use a hammer. A power grip requires the use of multiple large muscles in the arm. Using the proper grip while working with a hammer will reduce the chances of tendonitis and other issues.

In Conclusion…

If you have never used a titanium hammer before, try one and see the difference for yourself. You may be surprised and wonder why you didn’t make the switch much sooner. Then again, you may decide that your trusty old steel hammer is the one you need to stick with. We fully believe that any general contractor or tradesman should work with tools that fit comfortably in their hand.

6 Comments

  • Kylie Dotts

    October 26, 2017 at 10:13 am

    I didn’t realize that titanium was lighter than steel. It makes sense that a hammer or something made of titanium would not only be able to be used more often because it’s more durable but also be more efficient with it being a lighter material. That would be really good to use in a car or as a building material in a house as well.

    Reply
  • Steven Eber

    September 7, 2018 at 10:57 am

    Apparently I am missing something. A two pound hammer still weighs two pounds no matter what it is made of. The face of the hammer must still be made of steel so rebound is still the same. Where does this extra transfer force come from?

    Reply
    • Acme Tools

      September 7, 2018 at 11:28 am

      Hello, Thank you for your comment. The face of the hammer does not have to be steel. In the case of some Stiletto and Martinez hammers the entire head and face of the hammers are Titanium. This allows for use of a lighter hammer that can be swung faster and with less rebound but still give the same results as a heavier steel hammer. The high-end 15oz Titanium hammers perform similarly to a 26-28 oz steel hammer but offer less recoil back to your joints.

      Thank you,
      Acme Tools

      Reply
    • Christopher Verge

      January 22, 2020 at 1:30 pm

      The stiletto 15 ounce ti-bone is by far the best hammer money can by and the air grip handle is the best thing they ever come out with and the impact of when you drive a nail in is so much better and less wear and tear on your body I know I’ve been in construction my entire life and haven’t found a better hammer yet.

      Reply
  • Alice Carroll

    March 10, 2020 at 7:14 pm

    It’s great to know that titanium is a lot lighter than steel, making pounding nails a little bit faster. Maybe I should start looking into not only looking into using titanium tools but also work with titanium metals for my projects as well. Using lighter metals seems like it will make transporting my metal sculptures easier.

    Reply

Leave a Reply

This site uses Akismet to reduce spam. opens in a new windowLearn how your comment data is processed.

hide