ShearTec II 8In Parallelogram Spiral Jointer
LAGUNA TOOLS-MJOIN8020Unique parallelogram support system allows the table to move in the same arc as the cutter head when raised or lowered. This uniform, close clearance to the cutting blade acts as a more efficient chip... read more
Warehouse acquiring product. Usually ships in 7-10 business days.
SHIPPING & HANDLING
Calculate Shipping Close
Please enter your US zip code to see available shipping options.
This item is shipped via "truck freight" (common carrier or flat-bed, not FedEx). The truck must be able to access the place of delivery. Acme provides "Lift Gate" service free of charge. Lift gate service means the freight is lowered to the ground. It is your responsibility to move the product after it has been lowered to the ground.
Special Handling ChargeClose
Due to the size or weight of this item, it has a handling charge associated with it. The handling charge is a per item charge and will be applied during the checkout process.
Unique parallelogram support system allows the table to move in the same arc as the cutter head when raised or lowered. This uniform, close clearance to the cutting blade acts as a more efficient chip breaker. Cabinet stand completely encases motor and pulleys to protect from dust and shavings. The specially-designed cast-iron fence is extra long for continued support throughout the cut. Modular cutter head provides a consistently clean cut. Jack-screw arrangement allows easy replacement and adjustment of individual knives. In the event the entire cutter head has to be removed, a new module can be fitted in place without production down-time. The extra-long table provides a full 83 In. of work support. The Laguna ShearTec II is at the cutting edge of spiral cutter head technology today. Deep gullets allow chips to exit fast & keep the head clean. The inserts are made from thicker solid German carbide & set into the head on a flat surface rather than a cone design. This allows more torque to be used when tightening the inserts. All of the inserts are slightly angled to give a shear type cut with low impact & less kick-back action. The leading edge is crowned to minimize lines appearing. Laguna ShearTec II heads are all 6 row; most competitors’ heads offer just 3 or 4 rows. There obviously are a host of benefits associated from the additional rows: more carbide inserts, longer life, less noise and vibration, less kick-back & smoother finish. There obviously are a host of benefits associated from the additional rows: more carbide inserts, longer life, less noise and vibration, less kick-back & smoother finish.
- Motor: 3 HP, 220 Volt, 1 phase, TEFC
- Fence dimensions: 4-3/4 In. x 40 In.
- Fence tilt: 90° & 45° with positive stop
- Table height: 33 In.
- Max. width: 8 In. max. depth: 1/2 In.
- Dust port: 4 In.
- Wheel system: built-in
- Motor amperage rating: 13 A
- Cutter-head RPM: 5000 RPM
- Adjustment: parallelogram w. crank
- Rabbeting capacity: 1/2 In.
- Knife system: ShearTecII
- 4 Sided carbide 6 row X 9 = 54
- Cutter-head diameter: 3 In.
- Table dimensions: 8 In. x 83 In.
|Acme Tools Brand Name:||LAGUNA TOOLS|
|Acme Tools Part Number:||MJOIN8020|
|Adjustable Depth Stops:||Yes|
|Assembled Weight (lbs):||648.0|
|Bench or Stationary:||Stationary|
|Blade Height (in):||0.59|
|Blade Material:||Carbide German|
|Blade Thickness (in):||0.0984|
|Blade Width (in):||0.59|
|Caster Platform Included:||Yes|
|Color / Finish:||Black/Gray|
|Cord Length (ft):||6|
|Country of Origin:||TWN|
|Drive Motor System:||3 HP 220 Volt 1 Phase|
|Dust Port Outside Diameter (in):||4|
|Electrical Cord Configuration:||Nema 6-30|
|Fence Height (in):||4.75|
|Fence Length (in):||40|
|Fence Tilt Range:||45|
|Fence Type:||Cast Iron Rack & Pinion|
|Helical Cutter Head:||Yes|
|Integrated Rabbeting Edge:||Yes|
|Internet Product Code (IPC):||99087D0C95D|
|Jointer Design:||Closed Stand|
|Lowest Operational Speed (rpm):||5000|
|Maximum Cutting Depth (in):||0.5|
|Maximum Speed (rpm):||5000|
|Motor Bearings:||Taiwan ISO 9001|
|Motor Horsepower (hp):||3|
|Overall Height (in):||38|
|Overall Length (in):||83|
|Overall Width (in):||22|
|Package Contents:||Complete 8" Jointer|
|Positive Stops:||45 & 90|
|Rabbeting Depth (in):||0.5|
|Table Height From Floor (In):||33|
|Table Length (in):||83|
|Table Material:||Cast Iron|
|Table Space in Front of Blade:||40.5|
|Table Width (in):||8|
|Warranty:||New woodworking machines sold by Laguna Tools carry a one-year warranty effective from the date of shipping.|
|Internal Supplier Part #:||MJOIN8020|
|MFG Model # (Series):||MJOIN8020|
|MFG Part # (OEM):||MJOIN8020|
|Product Name:||ShearTec II 8In Parallelogram Spiral Jointer|
|Dust Exhaust Requirement (cfm):||850|
|Infeed Table Length (in):||40.5|
|Net Weight (lbs):||648|
|Outfeed Table Length (in):||40.5|
|Acme Tools Air Shipment Restricted:||N|
|Acme Tools Prop65 Compliant:||N|
|Acme Tools Carb Compliant:||N|