ShearTec II 6" 1.5HP Jointer
LAGUNA TOOLS-MJOIN6100-0130The Laguna 6" jointer with ShearTec II is a premium jointer giving you more of everything. Enclosed stand makes a stronger base, 1.5 HP gives you more power, longer beds (56 In.) allows for bigger job... read more
Warehouse acquiring product. Usually ships in 7-10 business days.
SHIPPING & HANDLING
Calculate Shipping Close
Please enter your US zip code to see available shipping options.
This item is shipped via "truck freight" (common carrier or flat-bed, not FedEx). The truck must be able to access the place of delivery. Acme provides "Lift Gate" service free of charge. Lift gate service means the freight is lowered to the ground. It is your responsibility to move the product after it has been lowered to the ground.
Special Handling ChargeClose
Due to the size or weight of this item, it has a handling charge associated with it. The handling charge is a per item charge and will be applied during the checkout process.
The Laguna 6" jointer with ShearTec II is a premium jointer giving you more of everything. Enclosed stand makes a stronger base, 1.5 HP gives you more power, longer beds (56 In.) allows for bigger jobs and last but not least: 6 row ShearTec II cutter head with a total of 42 four-sided carbide inserts gives you the smoothest cut & longest life. The Laguna ShearTec II is at the cutting edge of spiral cutter head technology today. Deep gullets allow chips to exit fast & keep the head clean. The inserts are made from thicker solid German carbide & set into the head on a flat surface rather than a cone design. This allows more torque to be used when tightening the inserts. All of the inserts are slightly angled to give a shear type cut with low impact & less kick-back action. The leading edge is crowned to minimize lines appearing. Laguna ShearTec II heads are all 6 row; most competitors’ heads offer just 3 or 4 rows. There obviously are a host of benefits associated from the additional rows: more carbide inserts, longer life, less noise and vibration, less kick-back & smoother finish. There obviously are a host of benefits associated from the additional rows: more carbide inserts, longer life, less noise and vibration, less kick-back & smoother finish.
- Motor 1.5 HP, 110 Volt, TEFC
- Cutter-head diameter: 2.4 In.
- Table dimensions: 6 In. x 56 In.
- Fence dimensions: 4 In. x 29 In.
- Dust port: 4 In.
- Wheel system: built-in
- Fence tilt: 90° & 45° with positive stop
- Motor amperage rating: 13 A
- Cutter-head: 5000 RPM
- Adjustment: wedge-bed w. lever
- Cutting width: 6 In.
- Cutting depth: 1/2 In.
- Rabbeting capacity: 1/2 In.
- Knife system: ShearTec
- 4 Sided solid carbide 6 rows X 7 = 42
|Acme Tools Brand Name:||LAGUNA TOOLS|
|Acme Tools Part Number:||MJOIN6100-0130|
|Adjustable Depth Stops:||Yes|
|Assembled Weight (lbs):||388.0|
|Bench or Stationary:||Stationary|
|Blade Height (in):||0.59|
|Blade Material:||Carbide German|
|Blade Thickness (in):||0.0984|
|Blade Width (in):||0.59|
|Caster Platform Included:||Yes|
|Color / Finish:||Black/Gray|
|Cord Length (ft):||6|
|Country of Origin:||TWN|
|Drive Motor System:||1.5 HP 110 Volt|
|Dust Port Outside Diameter (in):||4|
|Electrical Cord Configuration:||Nema 5-15|
|Fence Height (in):||4|
|Fence Length (in):||29|
|Fence Tilt Range:||45|
|Fence Type:||Cast Iron machined|
|Helical Cutter Head:||Yes|
|Integrated Rabbeting Edge:||Yes|
|Internet Product Code (IPC):||88FA6942380|
|Jointer Design:||Closed Stand|
|Lowest Operational Speed (rpm):||5000|
|Maximum Cutting Depth (in):||0.5|
|Maximum Speed (rpm):||5000|
|Motor Bearings:||Taiwan ISO 9001|
|Motor Horsepower (hp):||1.5|
|Overall Height (in):||38|
|Overall Length (in):||56|
|Overall Width (in):||20|
|Package Contents:||Complete 6" Jointer|
|Positive Stops:||45 & 90|
|Rabbeting Depth (in):||0.5|
|Table Height From Floor (In):||32.2|
|Table Length (in):||56|
|Table Material:||Cast Iron|
|Table Space in Front of Blade:||27|
|Table Width (in):||6|
|Warranty:||New woodworking machines sold by Laguna Tools carry a one-year warranty effective from the date of shipping.|
|Internal Supplier Part #:||MJOIN6100-0130|
|MFG Model # (Series):||MJOIN6100-0130|
|MFG Part # (OEM):||MJOIN6100-0130|
|Product Name:||ShearTec II 6" 1.5HP Jointer|
|Dust Exhaust Requirement (cfm):||650|
|Infeed Table Length (in):||27|
|Net Weight (lbs):||388|
|Outfeed Table Length (in):||27|
|Acme Tools Air Shipment Restricted:||N|
|Acme Tools Prop65 Compliant:||N|
|Acme Tools Carb Compliant:||N|