• Home
  • IRWIN-3041006

Mouse over above image to zoom.

6 Piece SPEEDBOR MAX Set 1/2, 5/8, 3/4, 7/8, 1, 1-1/4

3041006

Rating:
IRWIN-3041006 is rated 4.6 out of 5 by 7.
  • y_2017, m_8, d_18, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_7
  • loc_en_US, sid_10001_10751_62401, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_acmetools
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getAggregateRating, 23ms
  • REVIEWS, PRODUCT
 In-Stock

Ships in 1 business day

Low Price Guarantee
Low Price Guarantee Close  
Price Guarantee:
At Acme Tools we pride ourselves on offering you the best selection of tools, equipment and supplies in the industry at guaranteed low prices. From time to time we are not always able to see what the competition is doing. Our product is priced as low as possible. However, our prices won't be beat. If you see the exact item currently advertised for less (including the competitor's shipping and handling charges, taxes or any other hidden charges) we will match that price. We reserve the right to verify current and net prices in these situations. See terms and conditions below. In the event of finding a lower price, use our Contact Us form and include the following information in the Comments Section for verification: Your order number, date of purchase, product number of item as well as the competitor's website and price. We will review the information, issue credit (if applicable), and get back to you within two business days.

Terms and Conditions:
  • The seller must be an authorized retail dealer.
  • Product must be in stock and an identical item.
  • This policy does not apply to auction sites, closeouts, clearance sales, misprints, giveaways, special promotions or discount offers and may not be used in conjunction with any other Acme Tools offers or coupons.
  • This policy is only valid within 30 days after your purchase date.
  • Your refund will be issued in the same form as your original payment.
List: $49.86
Now: $34 .99

6 Piece SPEEDBOR MAX Set 1/2, 5/8, 3/4, 7/8, 1, 1-1/4

Qty,

6 Piece SPEEDBOR MAX Set 1/2, 5/8, 3/4, 7/8, 1, 1-1/4

The IRWIN® SPEEDOBOR® 6-Piece MAX Speed Bit Set contains everything you need to handle tough wood-boring tasks on the job site. These bits have a tri-flute design that combines fast cutting speed with rapid chip ejection, which all but eliminates bit clogging. Each Irwin Speedbor bit in this set has a self-feeding screw-point tip that holds the bit stable while you work. Three cutting spurs, one on each flute, scribe hole edges, creating cleaner cuts with little to no tearing. All bits in this set have 1/4-inch quick-change hex shanks that fit standard drill chucks or 1/4-inch quick-change adapters. The Irwin drill bit set comes with a molded ABS resin case that offers durable, organized storage for all six bits.

Features
  • This set includes six 1/2-inch to 1-1/4-inch Irwin Speedbor bits and a storage case
  • Tri-flute design ejects waste quickly and cuts faster than spade bits
  • Self-starting screw-point tip ensures rapid starts and accurate drilling
  • Cutting spurs on each bit flute create cleaner holes with less edge tearing
  • All bits have 1/4-inch quick-change hex shanks
  • The tough ABS resin case protects bits from rough worksite conditions
  • Irwin tri-flute drill bits come with a limited lifetime warranty
Specifications
Customer Reviews
Rated 5 out of 5 by from If you need to make holes in wood... I have used these bits since they first came out. If you want to make holes in wood, there are no better bits anywhere. They drill fast, they drill clean. Because of the large amount of material that is removed so quickly, I recommend using your drill's clutch. If the bit grabs on something (a staple, a knot, etc), it can rip the drill right out of your hand - assuming you have a decent, powerful drill. I used these a lot during the renovation of my house. I used them for drilling holes through the floor for pipes, holes through studs for wiring, for drilling starter holes for a jigsaw..... Every time I used them, I am still amazed by how well they work.
Date published: 2016-04-29
Rated 4 out of 5 by from great for soft woods goes thru pine and the like faster that any other bit i've ever used, accept for maybe some old bits i found in my basement from the early 1900's. (which are pretty much the same design by the way) However if your going to be drilling thru hardwood floors I recomend using these in an impact, almost broke my wrist using a dewalt corded drill when the bit, bit into the wood so hard it stopped and the drill kept going. changing to an impact solved this problem and was looking up into my kitchen in about 3 seconds. And that was going thru a 1" layer of pine and a 7/8" layer of oak that are both approximately 120 years old. (age=increased hardness in good conditions, in most hardwoods for those of you who didn't know) post script, this was with 1 1/4 bit im sure the smaller ones don't need the extra help of the impact.
Date published: 2014-08-23
Rated 5 out of 5 by from HVAC Owner These bits and quick attach systems are some of the BEST additions the wood drilling construction and remodeling industry has ever had. They are inexpensive, tough, ( Only Greenlee Power Drivers take nails) and they work very, very well well in all kinds of various woods. Irwin did what Milwaukee had 50 years to do and didn't do: Produce a drill bit that rarely clogs, drills like a mad man and doesn't cost a mint !! I love innovation and I highly recommend Irwin bits and tools.
Date published: 2012-11-16
Rated 5 out of 5 by from Handyman Love them. I don't think I'll ever waste my money on a spade bit again. You have to try them, you'll never go back.
Date published: 2012-02-14
Rated 4 out of 5 by from Building 960 sq ft addition These bits work great for going through studs and floor joists when running electrical wire. I use a Dewalt compact impact driver to get between studs. Able to drive through 3 studs at one time with out backing out. It so easy my 4 yr old does it by himself. If you hit a nail, the bit is basically junk - It has a hard time finishing the hole.
Date published: 2011-08-10
Rated 5 out of 5 by from Dad, DYI & Weekend Warrior, I got to say...these are simply the best and quickest set of drill bits I have ever used to drill through studs! If you don't own them you should! Bravo Irwin!
Date published: 2011-07-25
Rated 4 out of 5 by from President, Hard Hats for Christ These bits bite into the wood and drill a good clean hole in a big hurry. Just don't run into a nail or screw - the tri-flutes will be toast in a big hurry, too!
Date published: 2010-03-22
  • y_2017, m_8, d_18, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_7
  • loc_en_US, sid_10001_10751_62401, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_acmetools
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getReviews, 0ms
  • REVIEWS, PRODUCT