• Home
  • IRWIN-224134P

Mouse over above image to zoom.



IRWIN-224134P is rated 1.7 out of 5 by 15.
  • y_2017, m_8, d_14, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_15
  • loc_en_US, sid_10001_10751_63718, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_acmetools
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getAggregateRating, 16ms

Ships in 1 business day

Low Price Guarantee
Low Price Guarantee Close  
Price Guarantee:
At Acme Tools we pride ourselves on offering you the best selection of tools, equipment and supplies in the industry at guaranteed low prices. From time to time we are not always able to see what the competition is doing. Our product is priced as low as possible. However, our prices won't be beat. If you see the exact item currently advertised for less (including the competitor's shipping and handling charges, taxes or any other hidden charges) we will match that price. We reserve the right to verify current and net prices in these situations. See terms and conditions below. In the event of finding a lower price, use our Contact Us form and include the following information in the Comments Section for verification: Your order number, date of purchase, product number of item as well as the competitor's website and price. We will review the information, issue credit (if applicable), and get back to you within two business days.

Terms and Conditions:
  • The seller must be an authorized retail dealer.
  • Product must be in stock and an identical item.
  • This policy does not apply to auction sites, closeouts, clearance sales, misprints, giveaways, special promotions or discount offers and may not be used in conjunction with any other Acme Tools offers or coupons.
  • This policy is only valid within 30 days after your purchase date.
  • Your refund will be issued in the same form as your original payment.
List: $22.71
Now: $15 .99




The IRWIN® QUICK-GRIP® 3/4-Inch Pipe Clamp is ideal for large or heavy jobs that benefit from the extended reach offered by this type of clamp. Both halves of the clamp connect to the pipe using a clutch system; there's no need for threaded pipe. The clutch plates are also oversized to provide enhanced durability and better gripping characteristics. Irwin pipe clamps have taller and wider feet that provide stability to clamped pieces and more clearance between the tool's handle and work surfaces. They also have large handles that reduce the effort required to clamp parts and minimize hand fatigue. This Irwin pipe clamp has a 1-7/8-inch throat depth and fits any 3/4-inch unthreaded pipe.

  • Irwin pipe clamps handle heavy clamping jobs that require extensive reach
  • Unique clutch plate system eliminates the need for threaded pipe
  • Clutch plates are oversized for increased reliability and durability
  • 3/4-inch pipe clamp has large feet that offer greater stability and improved handle clearance
  • Oversized handle reduces hand fatigue and provides more clamping power with less effort
  • This product has a 1-7/8-inch throat depth
  • Use with unthreaded 3/4-inch pipe
  • Irwin pipe clamps have a limited lifetime warranty
Customer Reviews
Rated 1 out of 5 by from Poor design and quality This product does not clamp to the pipe well and slips when tightening making a waste of money. I am very disappointed with the quality and have wasted my money on this product.
Date published: 2017-04-18
Rated 1 out of 5 by from Absolutely useless I have the first generation (?) of these clamps. The difference being that the "fixed head" can slide along the pipe as well as the floating end. Sounds like a great idea until you realise that the handle cannot be turned if it is slid down the pipe as the handle collides with the pipe. Trying to keep the head in the proper location at the end of the pipe with the slipping clutches is impossible. When removed from the pipes the clutches also have a tendency to fall out of the head. The engineer of this item obviously never tried to use it. Other than the nice blue paint job there is nothing good about these clamps. Stay Away - get the Pony's
Date published: 2017-03-25
Rated 4 out of 5 by from They do the job These Irwin 3/4" pipe clamps are totally fine and they certainly do the job. The Bessey ones however sit higher and are easier to crank. If these Irwin ones sat higher and were easier to crank I'd give them a 5-star too.
Date published: 2017-02-17
Rated 3 out of 5 by from convenient if your pipe is not threaded You need to make sure the fixed end is pushed firmly on to the pipe. my biggest complaint is it needs a wider base for stability and pads on the clamps
Date published: 2017-01-24
Rated 1 out of 5 by from No Grip I bought 8 sets and I cant get them to grip on the 3/4" pipes that I have. Looks like I have to modify the pipes to get a grip. Not a great design
Date published: 2017-01-18
Rated 3 out of 5 by from Good after a hack Had a lot of frustration because the clutch kept slipping on the fixed side. Tried to find a solution but couldn't find it, even tried to grind groves but that didn't help. A reviewer suggested adding duct tape to increase the thickness and that worked great. Bought this type because threaded pipe is harder to find in my area
Date published: 2017-01-01
Rated 1 out of 5 by from Poor Design I bought these clamps because I heard the Irwin name was a great brand. Out of the ox they were useless! Not threading the fixed end allows it to free spin. Thought I was doing sonething wrong, when I tried to seat the pipe the clutch and spring shot out. Definitely taking them back in the AM.
Date published: 2016-10-21
Rated 1 out of 5 by from Poorly engineered product I notice one very old review that indicates this a great product. Maybe something has changed in manufacturing that is off spec. My experience is similar to the most current reviews .. the tightening end slips and slides off the pipe because the clutch pieces do not grip the pipe. The adjustable end works just fine. I experimented a bit and came up with a low tech solution. If your pipes do not have threads on the end you can wrap once around the end of the pipe with duct tape. This is just enough thickness and friction for the clamp to hold tight. If the pipe has threads than wrap the duct tape twice around. I would have thought that Irwin Tools would have engineered a solution to make this a quality product instead of suffering such dismal ratings. The actual solution for Irwin Tools is very simple but would require re-tooling of the mold for manufacture.
Date published: 2016-08-28
  • y_2017, m_8, d_14, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_15
  • loc_en_US, sid_10001_10751_63718, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_acmetools
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getReviews, 0ms