13 Spindle Boring Machine
GENERAL INTL-75-440M1The 75-440 M1 is designed for cabinet makers and shelving applications where simultaneous in-line multi-hole drilling or boring can save time and increase shop productivity and provide greater accurac... read more
Warehouse acquiring product. Usually ships in 7-10 business days.
SHIPPING & HANDLING
(ground shipping to lower 48)
This item is shipped via "truck freight" (common carrier or flat-bed, not FedEx). The truck must be able to access the place of delivery. Acme provides "Lift Gate" service free of charge. Lift gate service means the freight is lowered to the ground. It is your responsibility to move the product after it has been lowered to the ground.
Call for Pricing Information: 877-345-2263
Please contact our Customer Support Department or local Retail Store for the most current price and availability. We will be able to assist you with any needed freight quotes or local pick up pricing.
The 75-440 M1 is designed for cabinet makers and shelving applications where simultaneous in-line multi-hole drilling or boring can save time and increase shop productivity and provide greater accuracy. The 75-440 M1 features a large 31 1/2 by 15 3/4 In. table and has 13 spindles spaced 32 mm on center, allowing the user to drill up to 13 evenly spaced shelf pin holes at the same time. Indexing pins also allow correct spindle alignment to be maintained for resumed line boring in long work pieces. The 75-440 M1 is equipped with work piece stops at each end of the fence for perfectly aligned and parallel opposite face boring, and the adjustable depth stop controls the spindle stroke from 0 to a maximum 2-1/2 In. depth. The powerful 1 1/2 HP 110 V motor generates a spindle speed of 3450 RPM and delivers plenty of power for multi hole line boring, even in the toughest laminates. Note: The bit collets on model 75-440 M1 can accommodate up to 10 mm shank diameter drill bits.
- Fully adjustable fence system with easy to read scales in both inches and metric for quick setup and accurate boring
- Heavy-duty cast-iron construction, machined with precision
- Indexing pins to maintain correct spindle alignment for resuming line boring operations in long workpieces
- Powerful 1 1/2 HP motor delivers plenty of power and speed for multiple hole boring even in the toughest laminates
|Acme Tools Brand Name:||GENERAL INTL|
|Acme Tools Air Shipment Restricted:||N|
|Acme Tools Prop65 Compliant:||N|
|Acme Tools Carb Compliant:||N|
|Acme Tools Part Number:||75-440M1|
|Assembled Weight (lbs):||211|
|Chuck Key Storage:||No|
|Color / Finish:||N/A|
|Drill Press Type:||Stationary|
|Integrated Laser Guide:||No|
|Internet Product Code (IPC):||3D7F2E991BB|
|Speed Range High (rpm):||3450|
|Speed Range Low (rpm):||3450|
|Spindle Travel (in):||2.5|
|Table Tilt Range (Deg):||N/A|
|Table Work Surface Size:||31.5 x 15.75|
|Tilting and Swiveling Table:||No|
|Net Tool Weight (lbs):||214|