Mouse over above image to zoom.

Right Angle Attachment


DREMEL-575 is rated 2.3 out of 5 by 11.
  • y_2017, m_7, d_19, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_11
  • loc_en_US, sid_10001_10751_64956, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_acmetools
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getAggregateRating, 23ms

Ships in 1 business day

Low Price Guarantee
Low Price Guarantee Close  
Price Guarantee:
At Acme Tools we pride ourselves on offering you the best selection of tools, equipment and supplies in the industry at guaranteed low prices. From time to time we are not always able to see what the competition is doing. Our product is priced as low as possible. However, our prices won't be beat. If you see the exact item currently advertised for less (including the competitor's shipping and handling charges, taxes or any other hidden charges) we will match that price. We reserve the right to verify current and net prices in these situations. See terms and conditions below. In the event of finding a lower price, use our Contact Us form and include the following information in the Comments Section for verification: Your order number, date of purchase, product number of item as well as the competitor's website and price. We will review the information, issue credit (if applicable), and get back to you within two business days.

Terms and Conditions:
  • The seller must be an authorized retail dealer.
  • Product must be in stock and an identical item.
  • This policy does not apply to auction sites, closeouts, clearance sales, misprints, giveaways, special promotions or discount offers and may not be used in conjunction with any other Acme Tools offers or coupons.
  • This policy is only valid within 30 days after your purchase date.
  • Your refund will be issued in the same form as your original payment.
List: $44.99
Now: $29 .99

Right Angle Attachment


Right Angle Attachment

Whether you're drilling, grinding or cutting, all sorts of hard-to-reach areas become instantly accessible with the Dremel 575 Right Angle Attachment. The quick connect system makes it easy to attach the 575 to the Dremel rotary tool, and the coupling system allows you to rotate the right angle drill attachment on the tool to achieve a perfect grip. Ball bearings and bevel gears provide smooth and cool operation.

  • Ball bearings and bevel gears provide smooth and cool operation
  • Coupling system allows you to rotate the attachment on your tool
  • Quick connect system easily attaches to your rotary tool in place of the housing cap, with no tools required
  • Compact, durable design for long-lasting, versatile use
  • Prevents marring and is non-marking
  • Load rating 180 lbs.
Customer Reviews
Rated 1 out of 5 by from Broken Shaft I was in a desperate need to cut through a bolt in a difficult area, so I purchase the EZ lock mandrel and some cutting discs, only to have the shaft of the 575 right angle attachment break within a minute of cutting. So far, I've been unable to find a replacement for this internal shaft component and feel like the right angle attachment and the new EZ lock pieces have been a waste of money.
Date published: 2017-04-30
Rated 2 out of 5 by from Awesome idea, but didn't last. I bought this about 2 weeks ago to help with hard to reach spaces on a bathroom remodel. It is a great idea and was very helpful, but the shaft broke after only 2 weeks (about 6 hours of actual use). It was disappointing. I really like the concept and I love my Dremel!
Date published: 2016-06-29
Rated 4 out of 5 by from worked great, won't get into the tighter spots I bought this to get into a tight spot under my dash for my project truck. Had some rust hidden up under the dash and had to cut it out to replace it with new metal. For the most part this tool helped a lot to cut in a tight area but it is still a little bulky in it's design and was hitting the bottom of the firewall/cowling area with the top of the tool before the cutting disc could make proper contact. I had to replace a barely used disc with a new one every couple minutes 'til the job was done so that i could keep cutting deep enough to get through the sheet metal. Even with that it helped a ton to get the cutting done only leaving the tighter corners and above the steering column to cut by hand. I have to admit to being surprised and somewhat concerned by some of the reviews relating to reliability. I assumed when I bought it that it was two shafts held by bearings and either a universal joint or bevel gears driving the two, but apparently that is not the case.
Date published: 2016-01-17
Rated 1 out of 5 by from shaft broken can not find a spare part ???? the shaft broken after few utilisation, nobody have a spare part
Date published: 2015-10-10
Rated 2 out of 5 by from Handy, ideal for cutting I enjoyed this tool but it did not last long before the multi-wired drive shaft failed. It failed soon and after relatively light use. I used it for cutting thin aluminum sheeting (20-40 thou). So far I have been unable to locate a replacement shaft which is frustrating. I opened the unit and the bearings and gears are in healthy shape. It is pricey for such short lifespan.
Date published: 2015-09-08
Rated 1 out of 5 by from can't just buy one I have now owned 3 of these and they all failed the same way, drive stem releases from gear, no repair or replacement part ..
Date published: 2015-08-30
Rated 2 out of 5 by from Doesn't work with the 220-01 WorkStation The part fits well on the tool itself. It appears to be solid and well-made. However, I bought the part to be used with the Dremel 220-01 WorkStation to provide a steady cutting platform with the drill press function. Except that it not compatible with the WorkStation at all. I've kept the part, as I am sure it will be useful. But I am looking at way to utilize the WorkStation in what I need.
Date published: 2015-04-29
Rated 2 out of 5 by from Shat is weak and easily breaks. I bought this at True Value for my dremel, used it with cutting disks in hard to reach places to cut/shape steel. The shaft in the bottom of this is made of pressed thin wires to form a square shaft. Well this is weak, and this just twisted apart and broke after only using it a few times. I was disappointed because it was pretty expensive and did not last very long. I do not recommend using it for anything stressful like cutting disks, sanding, or grinding. It seems to be built for light applications only.
Date published: 2015-04-26
  • y_2017, m_7, d_19, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_11
  • loc_en_US, sid_10001_10751_64956, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_acmetools
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getReviews, 0ms
Recommended Accessories